Module 02 · Lesson 05
Signal flow and the stagebox
One path, three stages: stage, channel strip, room.
The signal path7 min
- 1
Stage to console. Mic or DI box → stagebox → snake (analog multicore or one Cat5/6 cable) → console input.
- 2
Inside every channel strip. Gain → high-pass filter → gate → EQ → compressor → fader. The order can vary by console.
- 3
Console to congregation. Mix bus (main L/R, monitors, stream) → processor (crossover, delay, limiter) → amplifier → speaker.
Analog or digital stagebox?
| Analog multicore | Digital stagebox | |
|---|---|---|
| How it works | XLR sockets on stage, one thick copper cable to the desk. Preamps live in the console. | Preamps on stage convert to digital; one Cat5/6 or fibre cable carries 16–64+ channels. |
| Good | Simple, no latency, nothing to configure | Light, low noise, easy to expand |
| Watch out | Heavy, costly over long runs, picks up hum | Needs a matching protocol: AES50, Dante, etc. |
| Ch | Source | Ch | Source |
|---|---|---|---|
| 01 | Kick | 11 | Keys R |
| 02 | Snare | 12 | Piano L |
| 03 | Hi-hat | 13 | Piano R |
| 04 | Tom 1 | 14 | Organ |
| 05 | Tom 2 | 15 | Sax |
| 06 | Overhead L | 16 | Pastor wireless |
| 07 | Overhead R | 17 | Worship leader |
| 08 | Bass DI | 18 | BV 1 |
| 09 | Lead guitar | 19 | BV 2 |
| 10 | Keys L | 20 | BV 3 |