Skip to content

Module 02 · Lesson 06

Gain staging

Gain sets the input; the fader sets the mix.

The signal path5 min
Where your signal should live on a digital meter
LevelZoneMeaning
0 dBFSClippingDigital ceiling. Anything above is chopped off: harsh crackle. Never here.
−12 to −3Peaks & headroomLoud moments may touch this. Room for the drummer's big hit.
−24 to −12Sweet spotNormal singing and playing sits here (about −18 dBFS average).
below −50Noise floorHiss and hum. Too little gain leaves the voice down here with it.
  1. 1

    Fader down, solo. Pull the fader down and solo (PFL) the channel so you see its meter.

  2. 2

    Loudest part. Ask the musician to play or sing their LOUDEST part.

  3. 3

    Set the gain. Turn gain up until peaks reach about −12 to −6 dBFS.

  4. 4

    Then the fader. Only now bring the fader up to blend it in the mix.